For Outdoor Spigot Installation in KC

Web Design for Outdoor Spigot Installation Companies in Kansas City

Outdoor spigot installation customers are KC homeowners replacing a cracked or failed exterior faucet after a freeze — the most common single-winter plumbing failure in Kansas City — or homeowners adding a second hose bib on the back or side of the house to avoid dragging a hose from the front; or homeowners whose existing spigot leaks at the packing nut or drips continuously and needs replacement. The central education is why outdoor faucets crack in KC winters: a standard non-frost-free hose bib holds water in the faucet body and the short section of pipe inside the wall between the shutoff valve and the exterior wall penetration; when KC temperatures drop below freezing for multiple consecutive days — which occurs fifteen to twenty-five times per winter — that trapped water freezes, expands approximately nine percent by volume, and splits the faucet body or the adjoining copper pipe; the failure often does not become apparent until spring when the homeowner turns the water back on and water runs into the wall instead of out the spigot. How a frost-free hose bib prevents this: a frost-free hose bib (also called an anti-siphon frost-free sillcock) has a valve stem that extends eight to twelve inches inside the wall — the actual shutoff point is inside the conditioned space of the house where the temperature stays above freezing; when the handle is turned off, the water shuts off at the indoor valve seat and the water between the valve and the faucet head drains out through the spout; for the frost-free design to work, the faucet must be installed with a slight downward pitch toward the exterior so the water drains completely — a frost-free faucet installed level or sloping back toward the house holds water in the standpipe and can still freeze. Vacuum breaker requirement: Kansas City plumbing code requires an integral vacuum breaker on outdoor hose bibs — the vacuum breaker prevents backflow from a garden hose left submerged in a bucket or pool from being siphoned back into the potable water supply; most frost-free hose bibs manufactured after 2000 have an integral vacuum breaker built into the head; replacing an older non-anti-siphon spigot requires a vacuum-breaker-equipped replacement to meet current code.